test_decoder_card

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
test_decoder_card [2018/10/03 10:45] walkeradmintest_decoder_card [2023/03/09 22:35] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Test Decoder Card ====== ====== Test Decoder Card ======
-<color darkorange>Oct 2018</color>+<color darkorange>Oct 2018</color>\\  
 +<color darkorange>Updated Feb 2019</color>
  
 ---- ----
Line 12: Line 13:
 \\  \\ 
 \\  \\ 
 +----
 +**Introduction**
 +\\ 
 +\\ 
 +The hardware list for devices is:
 +\\ 
 +\\ 
 +**decoder0 (decoder card)**\\ 
 +**delta-x3600 (ASI card)**\\ 
 +**sdi**\\ 
 +\\ 
 +\\ 
 +lspci gives (this unit has no RF card)
 +\\ 
 +<file>
 +00:00.0 Host bridge: Intel Corporation Device 5918 (rev 05)
 +00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
 +00:01.1 PCI bridge: Intel Corporation Skylake PCIe Controller (x8) (rev 05)
 +00:02.0 VGA compatible controller: Intel Corporation Device 591d (rev 04)
 +00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
 +00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
 +00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
 +00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
 +00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)
 +00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
 +00:1d.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #11 (rev f1)
 +00:1d.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #12 (rev f1)
 +00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31)
 +00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
 +00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
 +00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
 +00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
 +02:00.0 Multimedia video controller: TELEFON AKTIEBOLAGET LM Ericsson Device 1234
 +03:00.0 Multimedia controller: Deltacast Device 000f
 +05:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
 +06:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
 +</file>
  
 ---- ----
Line 27: Line 65:
     decoder0     decoder0
     sdi0     sdi0
 +
 +{{:ls_dev.jpg?900|}}
 +\\ 
 +\\ 
 +If these are missing, the card may have failed (or just failed to boot) if you restart the unit and still don't see these two entries then you may have a decoder card failure.
 +\\ 
 +\\ 
 +If these are not listed then there is a hardware or driver issue with the card.  First step would be to try reinstalling.
 +\\ 
 +\\ 
 +
 +----
 +==== When the Decoder is in use ====
 +
 +<file>
 +    From the command line, run:
 +    
 +    lsmod | grep decoder
 +
 +    You should see an output similar to the following:
 +    
 +    decoder  22463  1
 +    
 +    decoder is the decoder module
 +    
 +    22463 is the driver size in bytes, so this may change depending on your verions
 +    
 +    1 is the number of decodes. So 0 means you are not decoding using the module, and 1-4 is decodes (1 UHD or up 
 +    to 4 HD)
 +
 +    
 +    
 +    For the SDI:
 +
 +    lsmod | grep sdi
 +
 +    sdi  17706  1
 +    
 +    Last number is number of instances using driver. 0 means the device isn't used.
 +</file>
 +{{:lsmod_decoder.jpg|}}
 +\\ 
 +\\ 
 +{{:lsmod_sdi.jpg?370|}}
 +
 \\  \\ 
 \\  \\ 
  
test_decoder_card.1538559914.txt.gz · Last modified: 2023/03/09 22:35 (external edit)