Differences

This shows you the differences between two versions of the page.

--- pcap_to_ts [2016/12/15 08:49] – [Convert .pcap to .ts] walkeradmin
+++ pcap_to_ts [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== PCAP to TS ======
+<color orange>Capture and Convert MFEL streams</color>
 ----
 \\
@@ Line 28: / Line 28: @@
     The format for tcpdump is - tcpdump -i <interface> -s 65535 -w <some-file>
     tcpdump -i eth2 -B 64000 dst host 239.0.12.1 and port 1234 and multicast -w /home/ts_capture_test.pcap
+    Example:
+    tcpdump -i eth2 -B 64000 dst host 239.0.100.1 and port 1234 and multicast -w /home/hd_tennis_10Mbs.pcap
     if the syntax is correct, the tcpdump will start:
     tcpdump: listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes
@@ Line 57: / Line 62: @@
 \\
 There is a tool available called <color red>Extractor.exe</color> that we can use to extract the TS from the .pcap file.
+\\
+\\
+Download the extractor file here {{ :extractor.zip |}}
 \\
 \\
@@ Line 66: / Line 74: @@
     extractor source_file.pcap output.ts multicast port
 \\
-If I have a source file called <color red>mfel.pcap</color> and I want to extract this to <color red>mfel.ts</color red>, assuming the original multicast details are 239.0.12.1:1234 then my command line will be:
+If I have a source file called <color red>mfel.pcap</color> and I want to extract this to <color red>mfel.ts</color>, assuming the original multicast details are 239.0.12.1:1234 then my command line will be:
 \\
 \\