Differences

This shows you the differences between two versions of the page.

--- simple_linux_ts_streamer [2020/10/13 08:47] – walkeradmin
+++ simple_linux_ts_streamer [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Simple Linux TS Streamer ======
-<color darkorange>Sep 2017</color>
+<color darkorange>Oct 2020</color>
 \\
 \\
@@ Line 15: / Line 15: @@
 In there run the following command:
-nohup sudo ./mpeg2ts_broadcaster 10.132.0.7 239.1.1.1 1234 0 ~/temp/F3720p.ts &
-Where:
-.132.0.7 -> is the IP address of the interface you want to stream from
-.1.1.1 -> multicast you want it come out on
--> Port
--> To loop forever
-~/temp/F3720p.ts -> Path to your ts file to use
-If you wrap the nohup and & around it, you can then disconnect and leave it running.
-To kill it:
-Sudo ps aux | grep mpeg2
-You will see it running as a process – just need to kill it: sudo kill -9 processid
+    nohup sudo ./mpeg2ts_broadcaster 10.132.0.7 239.1.1.1 1234 0 ~/temp/F3720p.ts &
+Where:\\
+.132.0.7 -> is the IP address of the interface you want to stream from\\
+.1.1.1 -> multicast you want it come out on\\
+-> Port\\
+-> To loop forever\\
+~/temp/F3720p.ts -> Path to your ts file to use\\
+\\
+\\
+If you wrap the nohup and & around it, you can then disconnect and leave it running.
+\\
+\\
+To kill it:\\
+Sudo ps aux | grep mpeg2\\
+You will see it running as a process – just need to kill it: sudo kill -9 processid\\