Differences

This shows you the differences between two versions of the page.

--- second_locking_code [2019/11/12 13:21] – walkeradmin
+++ second_locking_code [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 10: / Line 10: @@
 \\
 {{ :lockingcodecontroller.jpg?800 |}}
+\\
+\\
+However for some licenses a second locking code is required, this code (at the time of writing) is only available from the command line.
+\\
+\\
+Using either SSH or Keyboard/Mouse login to the RX1.
+\\
+    username: mfeng
+    password: 2u4y&C
+\\
+from the command line, run the following:
+\\
+    cd /opt/ericsson/license-manager/bin/
+    sudo ./echoid -d
+\\
+(you will have to re-enter the password)
+<file>
+  Sentinel RMS Development Kit 8.6.1.1401 Host Locking Code Information Utility
+  Copyright (C) 2014 SafeNet, Inc.
+        ID PROM                            : 0x0
+        Disk ID                            : 0x4A1366D6
+        Host name                          : ENV-4E-963668
+        Ethernet address[1]                : 74-FE-48-28-6E-A0
+        Hard Disk Serial[1]                : 002732101E4C
+        CPU Info String                    : GenuineIntel Intel(R) Xeon(R) CPU E3-1245 v6 @ 3.70GHz 6 14 9
+        UUID                               : 4A30AAC8-F4E7-7241-8D20-18132D95D984
+                Locking Code 1 [1] : 2018-*1E7 AY7B SU2H DPCR
+                Locking Code 1 [1] (Old Style) : 2018-5F41F
+        ---------------------------------------------------------------------
+        Ethernet address[2]                : 74-FE-48-28-6E-A1
+        Hard Disk Serial[1]                : 002732101E4C
+                Locking Code 1 [2] : 2018-*162 UJRZ V257 RZFA
+                Locking Code 1 [2] (Old Style) : 2018-6F41B
+        ---------------------------------------------------------------------
+</file>
+You will get an output similar to the above with Locking Code 1 (this is the locking code you can see from the GUI) and Locking Code 2, the second locking code required for some licenses.
+\\