second_locking_code
Second Locking Code
Nov 2019
Introduction
When looking at the RX1 GUI, under servers we can see the Locking code for license generation.
However for some licenses a second locking code is required, this code (at the time of writing) is only available from the command line.
Using either SSH or Keyboard/Mouse login to the RX1.
username: mfeng password: 2u4y&C
from the command line, run the following:
cd /opt/ericsson/license-manager/bin/ sudo ./echoid -d
(you will have to re-enter the password)
Sentinel RMS Development Kit 8.6.1.1401 Host Locking Code Information Utility Copyright (C) 2014 SafeNet, Inc. ID PROM : 0x0 Disk ID : 0x4A1366D6 Host name : ENV-4E-963668 Ethernet address[1] : 74-FE-48-28-6E-A0 Hard Disk Serial[1] : 002732101E4C CPU Info String : GenuineIntel Intel(R) Xeon(R) CPU E3-1245 v6 @ 3.70GHz 6 14 9 UUID : 4A30AAC8-F4E7-7241-8D20-18132D95D984 Locking Code 1 [1] : 2018-*1E7 AY7B SU2H DPCR Locking Code 1 [1] (Old Style) : 2018-5F41F --------------------------------------------------------------------- Ethernet address[2] : 74-FE-48-28-6E-A1 Hard Disk Serial[1] : 002732101E4C Locking Code 1 [2] : 2018-*162 UJRZ V257 RZFA Locking Code 1 [2] (Old Style) : 2018-6F41B ---------------------------------------------------------------------
You will get an output similar to the above with Locking Code 1 (this is the locking code you can see from the GUI) and Locking Code 2, the second locking code required for some licenses.
second_locking_code.txt · Last modified: 2023/03/09 22:35 by 127.0.0.1