check_mellanox_rivermax_card_serial
Differences
This shows you the differences between two versions of the page.
check_mellanox_rivermax_card_serial [2023/10/31 14:12] – created walkeradmin | check_mellanox_rivermax_card_serial [2023/10/31 14:15] (current) – walkeradmin | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | Check Mellanox Rivermax Card Serial | + | ====== |
+ | <color darkorange> | ||
+ | |||
+ | ---- | ||
+ | ===== Introduction ===== | ||
+ | |||
+ | When fitting a Mellanox ConnectX5 or ConnectX6 card to either RX1 (ConnectX5) or CE1 (ConnectX6) we need get obtain a license and put this on the M1 server, before requesting licences we require the serial number of the actual card. | ||
+ | \\ | ||
+ | \\ | ||
+ | Use the following procedure to obtain the card serial number: | ||
+ | \\ | ||
+ | < | ||
+ | Use the following Commands: | ||
+ | |||
+ | lspci | grep Mellanox | ||
+ | |||
+ | sudo lspci -vv -s xx:xx.x | grep " Serial number" | ||
+ | |||
+ | where xx:xx.x is the first string in the previous command | ||
+ | |||
+ | Returns (example with one card in the chassis) | ||
+ | |||
+ | lspci | grep Mellanox | ||
+ | 02:00.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx] | ||
+ | 02:00.1 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx] | ||
+ | |||
+ | sudo lspci -vv -s 02:00.0 | grep " Serial number" | ||
+ | [SN] Serial number: MT2045X09274 | ||
+ | |||
+ | Give this serial number to Gavin Dragonetti and he will supply you with a license file. | ||
+ | |||
+ | when you get the file, rename it to rivermax.lic and put it in this folder on the CE1 | ||
+ | |||
+ | / | ||
+ | |||
+ | Reboot the Server | ||
+ | </ |
check_mellanox_rivermax_card_serial.1698761537.txt.gz · Last modified: 2023/10/31 14:12 by walkeradmin