Differences

This shows you the differences between two versions of the page.

--- wiki:interface_team_or_bond_with_nmtui [2022/02/21 19:55] – [nmtui] walkeradmin
+++ wiki:interface_team_or_bond_with_nmtui [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 64: / Line 64: @@
 {{ :wiki:nmtui_005.png?400 |}}
 \\
-A New Connection window will open
+A New Connection window will open and for this example (and probably most examples) we will use the <color #ed1c24>Ethernet</color> option.
+\\
+\\
+When the next window opens, you can specify your interface name.
+\\
+\\
+{{ :wiki:nmtui_006.png?400 |}}
+\\
+Enter the name of your fist interface in your bond/team then select <color #ed1c24><OK></color>
+\\
+\\
+You will now see the interface you just selected in the Slaves box. Repeat this process to add the second interface in your bond/team.
+\\
+\\
+Now both interfaces are added as slaves.
+\\
+\\
+{{ :wiki:nmtui_008.png?400 |}}
+\\
+(while in this example one interface is a master and the other a slave, both the interfaces are slaves in the bond).
+\\
+\\
+Lastly we have to add all of the static IP information to the bond/team.
+\\
+\\
+{{ :wiki:nmtui_009.png?400 |}}
+\\
+Below the slaves box, we need to select the <color #ed1c24>Mode</color> there are many modes, but for this example I am using <color #ed1c24>Active Backup</color>, so only one interface is active at any time. Below this setting, enter the name of the <color #ed1c24>Primary</color> interface (enp2s0 in this example).
+\\
+\\
+Now enter the IP information for the bond.
+    Address
+    Gateway
+    DNS Servers
+Once complete, select <color #ed1c24><OK></color>
+\\
+\\
+You will be back at the original menu page
+\\
+\\
+{{ :wiki:nmtui_010.png?300 |}}
+\\
+Select <color #ed1c24>Quit</color> and either restart the network or reboot the server.
+\\
+\\