User Tools

Site Tools


upgrade_software_bundle

This is an old revision of the document!


Upgrade Software Bundle

Oct 2023


Introduction

Unlike the RX1, the CE1 software cannot be upgraded from the UI, for the most part, upgraded are implemented via SSH.


SSH in to the unit:

ssh@ipaddress
login as: mfeng/2u4y&C



elevate to root user:

  sudo -s (enter password 2u4y&C)



Give yourself write access to the upgrade folder:

  chmod go+w /opt/mediakind/robust-upgrade/mnt/bundles/import



Copy the upgrade bundle to the following path:

  /opt/mediakind/robust-upgrade/mnt/bundles/import    (if you have issues with permissions, copy the bundle to /home/mfeng then move it to /opt/mediakind/robust-upgrade/mnt/bundles/import



Import the bundle using the bundle manager:

  sudo bundle_manager import ce1-xxxxxxxx



Once copied, you should see the message:

  SUCCESS=True.



Use the bundle manager to check availbe bundles:

  sudo bundle_manager get_bundles



You should see a list of at least 2 bundles, and their versions: (because there are two banks)

  ce1_3.2.0.0_908073010.mkb
  ce1_3.1.0.1_0.mkb



To deploy the new bundle, use the following: WARNING, THIS WILL REBOOT THE BOX IMMEDIATELY!!!

  sudo bundle_manager switch_to ce1_//your_version//



Once rebooted, login again via SSH and use the bundle manager to check the version:

  sudo bundle_manager get_version



The CE1/RX1 are very short on disk space, use this command to remove any old bundles
sudo bundle_manager clear_auto

upgrade_software_bundle.1699971478.txt.gz · Last modified: 2023/11/14 14:17 by walkeradmin