Nov 2019

Introduction

When looking at the RX1 GUI, under servers we can see the Locking code for license generation.



However for some licenses a second locking code is required, this code (at the time of writing) is only available from the command line.

Using either SSH or Keyboard/Mouse login to the RX1.

  username: mfeng
  password: 2u4y&C

from the command line, run the following:

  cd /opt/ericsson/license-manager/bin/ 
  sudo ./echoid -d 

(you will have to re-enter the password)

  Sentinel RMS Development Kit 8.6.1.1401 Host Locking Code Information Utility
  Copyright (C) 2014 SafeNet, Inc.

        ID PROM                            : 0x0
        Disk ID                            : 0x4A1366D6
        Host name                          : ENV-4E-963668
        Ethernet address[1]                : 74-FE-48-28-6E-A0
        Hard Disk Serial[1]                : 002732101E4C
        CPU Info String                    : GenuineIntel Intel(R) Xeon(R) CPU E3-1245 v6 @ 3.70GHz 6 14 9
        UUID                               : 4A30AAC8-F4E7-7241-8D20-18132D95D984

                Locking Code 1 [1] : 2018-*1E7 AY7B SU2H DPCR
                Locking Code 1 [1] (Old Style) : 2018-5F41F

        ---------------------------------------------------------------------

        Ethernet address[2]                : 74-FE-48-28-6E-A1
        Hard Disk Serial[1]                : 002732101E4C

                Locking Code 1 [2] : 2018-*162 UJRZ V257 RZFA
                Locking Code 1 [2] (Old Style) : 2018-6F41B

        ---------------------------------------------------------------------

You will get an output similar to the above with Locking Code 1 (this is the locking code you can see from the GUI) and Locking Code 2, the second locking code required for some licenses.