enable_remote_access_to_gpio_pins
Enable Remote Access to GPIO Pins
If you are using your Raspberry Pi via SSH or a Remote Desktop session, you need to enable remote access of the GPIO Pins, to do this from the command line, do the following:
sudo raspi-config
┌──────────────────┤ Raspberry Pi Software Configuration Tool (raspi-config) ├───────────────────┐ │ │ │ 1 Expand Filesystem Ensures that all of the SD card storage is │ │ 2 Change User Password Change password for the default user (pi) │ │ 3 Boot Options Choose whether to boot into a desktop envi │ │ 4 Wait for Network at Boot Choose whether to wait for network connect │ │ 5 Internationalisation Options Set up language and regional settings to m │ │ 6 Enable Camera Enable this Pi to work with the Raspberry │ │ 7 Add to Rastrack Add this Pi to the online Raspberry Pi Map │ │ 8 Overclock Configure overclocking for your Pi │ │ 9 Advanced Options Configure advanced settings │ │ 0 About raspi-config Information about this configuration tool │ │ │ │ │ │ <Select> <Finish> │ │ │ └────────────────────────────────────────────────────────────────────────────────────────────────┘
Advanced Options:
┌──────────────────┤ Raspberry Pi Software Configuration Tool (raspi-config) ├───────────────────┐ │ │ │ A1 Overscan You may need to configure overscan if blac ↑ │ │ A2 Hostname Set the visible name for this Pi on a netw ▮ │ │ A3 Memory Split Change the amount of memory made available ▒ │ │ A4 SSH Enable/Disable remote command line access ▒ │ │ A5 SPI Enable/Disable automatic loading of SPI ke ▒ │ │ A6 I2C Enable/Disable automatic loading of I2C ke ▒ │ │ A7 Serial Enable/Disable shell and kernel messages o ▒ │ │ A8 Audio Force audio out through HDMI or 3.5mm jack ▒ │ │ A9 1-Wire Enable/Disable one-wire interface ▒ │ │ AA GPIO Server Enable/Disable remote access to GPIO pins ↓ │ │ │ │ │ │ <Select> <Back> │ │ │ └────────────────────────────────────────────────────────────────────────────────────────────────┘
Select GPIO Server
┌──────────────────────────────────────────────────────────┐
│ │
│ Would you like the GPIO server to be accessible over the │
│ network? │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ <Yes> <No> │
│ │
└──────────────────────────────────────────────────────────┘
You will get a confirmation that the GPIO Server is available.
┌──────────────────┤ Raspberry Pi Software Configuration Tool (raspi-config) ├───────────────────┐ │ │ │ 1 Expand Filesystem Ensures that all of the SD card storage is │ │ 2 Change User Password Change password for the default user (pi) │ │ 3 Boot Options Choose whether to boot into a desktop envi │ │ 4 Wait for Network at Boot Choose whether to wait for network connect │ │ 5 Internationalisation Options Set up language and regional settings to m │ │ 6 Enable Camera Enable this Pi to work with the Raspberry │ │ 7 Add to Rastrack Add this Pi to the online Raspberry Pi Map │ │ 8 Overclock Configure overclocking for your Pi │ │ 9 Advanced Options Configure advanced settings │ │ 0 About raspi-config Information about this configuration tool │ │ │ │ │ │ <Select> <Finish> │ │ │ └────────────────────────────────────────────────────────────────────────────────────────────────┘
Now Select Finish - You will be back at the command prompt (you may need to reboot)
enable_remote_access_to_gpio_pins.txt · Last modified: 2023/03/09 22:35 by 127.0.0.1