Differences

This shows you the differences between two versions of the page.

--- circuit_and_pcb_layouts [2017/03/06 10:08] – walkeradmin
+++ circuit_and_pcb_layouts [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 20: / Line 20: @@
 ----
+==== PCB Layout v3.1 ====
+\\
+\\
+Here is what the PCB layout looks like (from the CAD drawings) I have not had any made yet, so this may be subject to change (I am writing this page Early March 2017).
+\\
+\\
+    Full PCB - All Layers
+\\
+{{ :pi_ntp_pcb_all_layers.jpg?800 |}}
+\\
+\\
+    Photo View
+\\
+{{ :pi_ntp_pcb_all_layers_photoview.jpg?800 |}}
+\\
+\\
+    Top Layer Silkscreen
+\\
+{{ :pi_ntp_pcb_silkscreen_top.jpg?800 |}}
+\\
+\\
+    Top Layer Copper
+\\
+{{ :pi_ntp_pcb_copper_top.jpg?800 |}}
+\\
+\\
+    Bottom Layer Copper
+\\
+{{ :pi_ntp_pcb_copper_bottom.jpg?800 |}}
+\\
+\\
+    Outline Layer
+\\
+{{ :Pi_NTP_PCB_Outline.jpg?800 |}}
+\\
+\\
+If I have created this correctly, the PCB should be exactly the same size as the Raspberry Pi Zero (1, 1.3 and W) which is 65mm x 30mm (excluding edge connectors such as USB and HDMI) and the four corner holes should line up.
+\\
+\\
+----
+===== Gerber Files =====
+\\
+If you wish to get your own PCBs made, you can use the attached Gerber files {{ :pi_ntp_3.1_gerber.zip |Here}}. However I have not had any made myself yet, so you might want to either wait, or create your own PCB.
+\\
+\\
+----
+===== PCB File =====
+\\
+This is the PCB Layout file, produced in software called Sprint Layout v6.0 [[http://www.abacom-online.de/uk/html/sprint-layout.html]]. The PCB file can be downloaded {{ :pi_ntp_3.1_pcb.zip |Here}}.
+\\
+\\
+On the Sprint Layout website, you can download a free 'Viewer' for the PCB file so you can print it out. Please check their website for this software ([[http://www.abacom-online.de/uk/html/sprint-layout.html|Sprint Layout]])
+\\
+\\