arp-scan
This is an old revision of the document!
Table of Contents
Arp-Scan
Arp-Scan is a command line utility for scanning MAC addresses that are stored in the ARP Table. By default on Raspbian the timeout for ARP table entries is 60s, you can check cat /proc/sys/net/ipv4/neigh/default/gc_stale_time for exact time.
Installation
To install Arp-Scan, from the command line enter: Note: you may have to do a sudo apt-get update first.
sudo apt-get install arp-scan
Operation
To use arp-scan enter the following from the command line:
sudo arp-scan -l
Example Output
Interface: eth0, datalink type: EN10MB (Ethernet) Starting arp-scan 1.8.1 with 256 hosts (http://www.nta-monitor.com/tools/arp-scan/) 192.168.1.1 00:1d:aa:a5:66:08 DrayTek Corp. 192.168.1.4 b8:ac:6f:2c:cf:44 Dell Inc 192.168.1.5 3c:d9:2b:54:cd:94 (Unknown) 192.168.1.6 38:60:77:df:da:fe (Unknown) 192.168.1.7 b8:27:eb:25:73:7d (Unknown) 192.168.1.9 b8:27:eb:a2:83:97 (Unknown) 192.168.1.3 b8:a3:86:6a:4a:d0 (Unknown) 192.168.1.16 40:8d:5c:1e:76:bb (Unknown) 192.168.1.51 00:19:fb:88:64:96 BSkyB Ltd 192.168.1.56 c0:33:5e:41:7a:d1 (Unknown) 192.168.1.56 c0:33:5e:41:7a:d1 (Unknown) (DUP: 2) 192.168.1.62 b8:3e:59:28:43:30 (Unknown) 192.168.1.54 00:ae:fa:f0:a4:a9 (Unknown) 192.168.1.59 f4:5c:89:ec:0f:9b (Unknown) 192.168.1.61 b8:3e:59:19:02:0d (Unknown)
arp-scan.1474395702.txt.gz · Last modified: 2023/03/09 22:35 (external edit)