Differences

This shows you the differences between two versions of the page.

--- aquila_live_stat_mux [2023/11/08 13:40] – walkeradmin
+++ aquila_live_stat_mux [2023/11/08 14:13] (current) – [Using Announcer Address] walkeradmin
@@ Line 37: / Line 37: @@
     k9s
 This will launch the k9s application
-{{ :k9s001.jpg?nolink&600 |}}
+\\
-select stream-processer-statmux-xxxxx
+\\
-press s
+{{ :k9s001.jpg?nolink&800 |}}
-ls
+\\
-look for smxMasterIni.json
+\\
-cat smxMasterIni.json |grep announce
+Scroll down and select the POD 'stream-processer-statmux-xxxxx' then press 's'
+\\
+\\
+{{ :k9s002.jpg?nolink&800 |}}
+\\
+\\
+Show the contents of the folder using 'ls' and look for smxMasterIni.json
+\\
+\\
+To find the announceAddress enter the following
+    cat smxMasterIni.json |grep announce
+You will get an output similar to below:
+<file>
  "announceAddress": "239.225.0.1",
   "announcePort": 15778,
@@ Line 49: / Line 60: @@
     "statmux.announce.port": 15778,
     "statmux.announce.ttl": 64
+</file>
-exit
+To get out of the K9s use 'exit' then 'ctrl-c'
-ctrl-c
+----
+==== Using Announcer Address ====
+\\
+The last big difference in v7 is that now you have to specify the announcer address in your services using and 'advanced parameter' in the Encoding Live service.
+\\
+\\
+When creating the Encoding Live services for your stat mux, you need to add a parameter to the 'Advanced Parameters' page.
+\\
-<<K9s-Shell>> Pod: mediakind/stream-processor-statmux-7cc8d75d85-dl95v | Container: statmux
+\\
-/opt/ericsson/stream-processing-statmux/bin $ ls
+{{ :statmux.announce.addr.jpg?nolink&900 |}}
-commit_sha.txt     smxMaster          smxMasterIni.json
+\\
+The advanced parameter is:
+    statmux.announce.addr    multicast
+    statmux.announce.addr    239.255.0.1
+\\
+The above is just an example, you will need to use the multicast address from your system.
+\\
+\\