cisco_inter_vlan_routing
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| cisco_inter_vlan_routing [2024/01/21 00:29] – [IP Routing] walkeradmin | cisco_inter_vlan_routing [2024/01/21 13:36] (current) – walkeradmin | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Cisco Inter VLAN Routing ====== | ====== Cisco Inter VLAN Routing ====== | ||
| + | ==== aka Switch Virtual Interfaces (SVI) or Management Interface ==== | ||
| <color # | <color # | ||
| \\ | \\ | ||
| Line 194: | Line 195: | ||
| \\ | \\ | ||
| \\ | \\ | ||
| - | To enable IP Routing on the switch, we will use the following: | + | To enable |
| \\ | \\ | ||
| + | en | ||
| + | conf t | ||
| + | ip routing | ||
| + | end | ||
| + | There is no text return from running this command. | ||
| \\ | \\ | ||
| + | \\ | ||
| + | No we can test to see the routes by using the following: | ||
| < | < | ||
| sh ip route | sh ip route | ||
| Line 214: | Line 222: | ||
| C 192.168.1.0/ | C 192.168.1.0/ | ||
| </ | </ | ||
| + | \\ | ||
| + | We can see that the two <color # | ||
| + | \\ | ||
| \\ | \\ | ||
| Now try to ping from Device A (192.168.1.38) to Device B (10.43.30.100). Remember, the gateway of Device A must be the IP Address of VLAN 10 (192.168.1.1 in this example). | Now try to ping from Device A (192.168.1.38) to Device B (10.43.30.100). Remember, the gateway of Device A must be the IP Address of VLAN 10 (192.168.1.1 in this example). | ||
| - | \\ | ||
| \\ | \\ | ||
| < | < | ||
| Line 225: | Line 235: | ||
| Reply from 10.43.30.100: | Reply from 10.43.30.100: | ||
| </ | </ | ||
| - | \\ | ||
| Now we can communicate with devices in VLAN 20 from VLAN 10. | Now we can communicate with devices in VLAN 20 from VLAN 10. | ||
| \\ | \\ | ||
cisco_inter_vlan_routing.txt · Last modified: 2024/01/21 13:36 by walkeradmin