WalkerWiki - wiki.alanwalker.uk

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Failed Muse Install 1080p SDI Board ======
\\ 
\\ 
** Note - This issue is now fixed in the G7 CentOS 6.7 installer Linux-Installer-2.00.00.003.iso**
\\ 
\\ 
When 6.2 was released, we also had a new SDI Input board that supports 1080p. Unfortunately there is an issue with the SDI (deltacast) driver in the ISO that causes the Muse to reboot during the installation process, thus redering the server useless.
\\ 
To fix this, follow this guide. This will be fixed by altering the ISO file, but this might be good information for the future, so I am writing this down.
\\ 
\\ 
===== Prerequisite =====
\\ 
----------------------------------------------------------------------------------
You must have installed a fresh ISO image on the Muse before starting this process,\\ 
I have not tested this on a Muse that already has software on it.\\ 
\\ 
You must also have already copied to the Muse the .tar.gz file for the 6.2 release\\ 
and extracted it, as instructed in the installation documentation.
----------------------------------------------------------------------------------
\\ 
\\ 
==== Recovery Overview ====
    1. Manually Install Deltacast Driver(s)
    2. Manually Remove Deltacast Driver(s) (this also removes rogue drivers that were in the ISO)
    3. Reinstall the whole package (including Deltacast Drivers)
\\ 
==== 1. Manually Install Deltacast Driver(s) ====
\\ 
To Manually install the Deltacast driver, use the following command:
\\ 
    yum install deltacast-x300-5.19-2.el6.x86_64.rpm
\\ 
The output will be something like this:
\\ 
    Loaded plugins: fastestmirror
    Setting up Install Process
    Examining deltacast-x300-5.19-2.el6.x86_64.rpm: deltacast-x300-5.19-2.el6.x86_64
    Marking deltacast-x300-5.19-2.el6.x86_64.rpm to be installed
    Determining fastest mirrors
    Resolving Dependencies
    --> Running transaction check
    ---> Package deltacast-x300.x86_64 0:5.19-2.el6 will be installed
    --> Finished Dependency Resolution
    
    Dependencies Resolved
    
    ==========================================================================================
     Package           Arch       Version       Repository                            Size
    ==========================================================================================
    Installing:
     deltacast-x300    x86_64      5.19-2.el6   /deltacast-x300-5.19-2.el6.x86_64     50 M
    
    Transaction Summary
    ===========================================================================================
    Install       1 Package(s)
    
    Total size: 50 M
    Installed size: 50 M
    Is this ok [y/N]: y    <---------------------- YOU HAVE TO PRESS Y HERE
    Downloading Packages:
    Running rpm_check_debug
    Running Transaction Test
    Transaction Test Succeeded
    Running Transaction
    Installing : deltacast--5.19-2.el6.x86_64                                          1/1
\\ 
\\ 
    The Server will reboot
\\ 
==== 2. Manually Remove Deltacast Driver(s) ====
\\
We now need to remove the drivers, this removed the drivers we just installed, and the rougue drivers from the ISO install that was done beforehand.
\\ 
To remove the drivers, enter:
\\ 
    yum remove deltacast-x300.x86_64 (you can find the exact driver name by using yum list installed)
\\ 
    Loaded plugins: fastestmirror
    Setting up Remove Process
    Resolving Dependencies
    There are unfinished transactions remaining. 
    You might consider running yum-complete-transaction first to finish them.
    The program yum-complete-transaction is found in the yum-utils package.
    --> Running transaction check
    ---> Package deltacast-x300.x86_64 0:5.19-2.el6 will be erased
    --> Finished Dependency Resolution
    
    Dependencies Resolved
    
     
    ==========================================================================================
     Package           Arch       Version       Repository                            Size
    ==========================================================================================
    
    Removing:
    deltacast-x300     x86_64     5.19-2.el6    installed                              50 M
    
    Transaction Summary
    ==========================================================================================
    Remove        1 Package(s)
    
    Installed size: 50 M
    Is this ok [y/N]: y
    Downloading Packages:
    Running rpm_check_debug
    Running Transaction Test
    Transaction Test Succeeded
    Running Transaction
    Warning: RPMDB altered outside of yum.
      Erasing    : deltacast-    x300-5.19-2.el6.x86_64                                   1/1
      Verifying  : deltacast-x300-5.19-2.el6.x86_64                                           1/1
    
    Removed:
      deltacast-x300.x86_64 0:5.19-2.el6
    
    Complete!
\\ 
The driver removal is complete
\\ 
\\ 
    System rebooted automatically
\\ 
==== 3. Reinstall the whole package ====
\\ 
\\ 
Now we can reinstall the whole package (6 files at the time of writing)
\\ 
From the command line, enter:
\\ 
    yum install -y *.rpm
\\ 
All six packages should now install giving an output similar to the following:
\\ 
    Loaded plugins: fastestmirror
    Setting up Install Process
    Examining deltacast-hd-5.19-2.el6.x86_64.rpm: deltacast-hd-5.19-2.el6.x86_64
    Marking deltacast-hd-5.19-2.el6.x86_64.rpm to be installed
    Loading mirror speeds from cached hostfile
    Examining deltacast-x300-5.19-2.el6.x86_64.rpm: deltacast-x300-5.19-2.el6.x86_64
    Marking deltacast-x300-5.19-2.el6.x86_64.rpm to be installed
    Examining envivio-muse-6.02.00-081.x86_64.rpm: envivio-muse-6.02.00-081.x86_64
    Marking envivio-muse-6.02.00-081.x86_64.rpm to be installed
    Examining ms416-2.0-15.el6.x86_64.rpm: 1:ms416-2.0-15.el6.x86_64
    Marking ms416-2.0-15.el6.x86_64.rpm as an update to 1:ms416-2.0-9.el6.x86_64
    Examining protobuf-2.3.0-8.el6.x86_64.rpm: protobuf-2.3.0-8.el6.x86_64
    Marking protobuf-2.3.0-8.el6.x86_64.rpm to be installed
    Examining python27-2.7-5.r01.x86_64.rpm: python27-2.7-5.r01.x86_64
    Marking python27-2.7-5.r01.x86_64.rpm to be installed
    Resolving Dependencies
    There are unfinished transactions remaining. You might consider running yum-complete-transaction first to     finish them.
    The program yum-complete-transaction is found in the yum-utils package.
    --> Running transaction check
    ---> Package deltacast-hd.x86_64 0:5.19-2.el6 will be installed
    ---> Package deltacast-x300.x86_64 0:5.19-2.el6 will be installed
    ---> Package envivio-muse.x86_64 0:6.02.00-081 will be installed
    ---> Package ms416.x86_64 1:2.0-9.el6 will be updated
    ---> Package ms416.x86_64 1:2.0-15.el6 will be an update
    ---> Package protobuf.x86_64 0:2.3.0-8.el6 will be installed
    ---> Package python27.x86_64 0:2.7-5.r01 will be installed
    --> Finished Dependency Resolution
    
    Dependencies Resolved
    
    ====================================================================================================
    Package         Arch         Version         Repository                                    Size
    =====================================================================================================
    Installing:
    deltacast-hd   x86_64        5.19-2.el6      /deltacast-hd-5.19-2.el6.x86_64                9.4 M
    deltacast-x300 x86_64        5.19-2.el6      /deltacast-x300-5.19-2.el6.x86_64              50 M
    envivio-muse   x86_64        6.02.00-081     /envivio-muse-6.02.00-081.x86_64               377 M
    protobuf       x86_64        2.3.0-8.el6     /protobuf-2.3.0-8.el6.x86_64                   971 k
    python27       x86_64        2.7-5.r01       /python27-2.7-5.r01.x86_64                     57 M
    
    Updating:
    ms416          x86_64        1:2.0-15.el6    /ms416-2.0-15.el6.x86_64                       5.6 M
    
    Transaction Summary
    ==================================================================================================
    Install       5 Package(s)
    Upgrade       1 Package(s)
    
    Total size: 499 M
    Is this ok [y/N]: y
    Downloading Packages:
    Running rpm_check_debug
    Running Transaction Test
    Transaction Test Succeeded
    Running Transaction
      Updating   : 1:ms416-2.0-15.el6.x86_64                                                   1/7
      Installing : 3.0-8.el6.x86_64                                                            2/7
      Installing : deltacast-x300-5.19-2.el6.x86_64                                            3/7
      Installing : deltacast-hd-5.19-2.el6.x86_64                                              4/7
      Installing : python27-2.7-5.r01.x86_64                                                   5/7
      Installing : envivio-muse-6.02.00-081.x86_64                                             6/7
    configuring httpd   ... SUCCESS
      Cleanup    : 1:ms416-2.0-9.el6.x86_64                                                    7/7
    
      Verifying  : envivio-muse-6.02.00-081.x86_64                                             1/7
      Verifying  :  python27-2.7-5.r01.x86_64                                                  2/7
      Verifying  : deltacast-hd-5.19-2.el6.x86_64                                              3/7
      Verifying  : deltacast-x300-5.19-2.el6.x86_64                                            4/7
      Verifying  : protobuf-2.3.0-8.el6.x86_64                                                 5/7
      Verifying  : 1:ms416-2.0-15.el6.x86_64                                                   6/7
      Verifying  : 1:ms416-2.0-9.el6.x86_64                                                    7/7
    
    Installed:
      deltacast-hd.x86_64 0:5.19-2.el6
      deltacast-x300.x86_64 0:5.19-2.el6
      envivio-muse.x86_64 0:6.02.00-081
      protobuf.x86_64 0:2.3.0-8.el6
      python27.x86_64 0:2.7-5.r01
    
    Updated:
      ms416.x86_64 1:2.0-15.el6
    
    Complete!
\\ 
\\ 
That is it, the upgrade / install is now complete. All that is required now is to connect to the muse software and re-license the unit. (I would give it a reboot first)\\ 
\\ 
\\