User Tools

Site Tools


wiki:centos_7_interface_naming

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
wiki:centos_7_interface_naming [2017/03/09 20:00] walkeradminwiki:centos_7_interface_naming [2023/03/09 22:35] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== CentOS 7 Interface Naming ====== ====== CentOS 7 Interface Naming ======
-<color #db5f0b>Jan 2017</color>+<color #db5f0b>Mar 2017</color>
 \\  \\ 
 \\  \\ 
Line 6: Line 6:
  
 ---- ----
 +<color red>Note:- </color> After reading this page, if you wish to rename your interfaces to something you are more used to, please see [[wiki:mfel_misnamed_ip_ports|this page]].
 +\\ 
 +\\ 
 From CentOS 7 onwards the way the interfaces are named has changed. Gone are the traditional eth0, eth1 etc. This is slightly annoying for those of use that are used to it.  From CentOS 7 onwards the way the interfaces are named has changed. Gone are the traditional eth0, eth1 etc. This is slightly annoying for those of use that are used to it. 
 \\  \\ 
Line 29: Line 32:
 *   [P<domain>]p<bus>s<slot>[f<function>][u<port>][..]1[i<interface>] *   [P<domain>]p<bus>s<slot>[f<function>][u<port>][..]1[i<interface>]
 </sxh> </sxh>
 +\\ 
 +Here is an example of a CentOS 7.2 installation, that is using multiple interfaces.
 +\\ 
 +<file>
 +ens513f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
 +ens513f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
 +ens513f2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
 +ens513f3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
 +enp4s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
 +enp4s0f3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
 +</file>
 +\\ 
 +So <color red>enp4s0f0</color> is what we would recognise normally as eth0.
 +\\ 
 +\\ 
 +<color red>en</color> is Ethernet. The letters <color red>p/s</color> are the index (I have seen other letters for this) and the value <color red>enp4s0f0 etc</color> is the interface number (again, its in a crappy order that doesn't necessarily follow the hardware port numbering).
 +\\ 
 +\\ 
 +In this above example, the server has two onboard interfaces (what we shall refer to as eth0 and eth1) and a PCI board that has four interfaces. This is why two of the interfaces have the letter p and four have the letter s. Where this letter comes from I have not yet worked out. 
 +\\ 
 +\\ 
 +
 +
 +
 +
 +
 +<color red></color>
wiki/centos_7_interface_naming.1489089632.txt.gz · Last modified: 2023/03/09 22:35 (external edit)