Differences

This shows you the differences between two versions of the page.

--- t1_chassis [2017/10/12 08:49] – walkeradmin
+++ t1_chassis [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== T1 Chassis======
 <color darkorange>T1 2000 Series platform based on Kontron SymKloud MS2900 chassis.</color>
-\\
+----
-\\
+----
 {{:t1_chassis.jpg?500|}}
 ----
@@ Line 11: / Line 11: @@
 \\
 ----
-==== Quick Notes ====
-The T1 Chassis has a lot of functionality not normally found in any traditional products, or in the Gx line of servers so far (G5, G6, G7, G8 etc) (with the exception of one of the UHD servers from 2016). The T1 is a chassis that comprises a number of blades, and two switches, where most of the ports are internal to the Chassis.
-\\
-\\
-----
-==== Chassis Front View ====
-{{:chassis_front.jpg?500|}}
-\\
-\\
-The front of the T1 Chassis has five removable fans (hot swap), the power button and access to the two switches. The unit does automatically power up when the power cables are inserted. The power cables are the type that have a notch in them, so standard IEC cables will not fit.
-\\
-\\
-----
-==== T1 Switches ====
-{{:t1_switch.jpg?600|}}
-\\
-\\
-The two switches at the top of the T1 Chassis allow access to the switch management, and to the Blade Servers. The T1 Switches each have  27 ports, but we can only access 7 of them from the front panel (strictly one of them is a serial port, so 26 IP Ports).
-\\
 \\
-{{:t1_sw_detail.jpg?500|}}
+  * [[Quick Notes]]\\
+  * [[Connect to Server via MGMT Port]]\\
+  * [[Serial over LAN connection issues]]\\