Differences

This shows you the differences between two versions of the page.

--- split_abr_encoding [2019/10/03 20:27] – walkeradmin
+++ split_abr_encoding [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Split ABR Encoding ======
-<color #db5f0b>Sept 2018</color>
+<color #db5f0b>Sept 2018</color>\\
+<color #db5f0b>Updated Oct 2019</color>
 \\
 \\
+----
+==== Note ====
+\\
+As of v11 (v11.0.1.4 is what is being used in this document) it is possible to do <color #00a2e8>Split ABR Encoding</color> using both <color #00a2e8>IP TS</color> and <color #00a2e8>SDI</color> inputs.
+\\
+\\
+==== Overview ====
 ----
 When encoding ABR Profiles, there can be times when the number and complexity of profiles exceeds the capabilities of a single server, for example:
@@ Line 23: / Line 32: @@
 \\
 \\
-===Requirements===
+==== Requirements ====
 ----
@@ Line 34: / Line 43: @@
 IP input, all servers must  use the name eth1 for the interface, and it must be the
 input interface)**
+**While it is possible to do this on appliances, it is much simpler to do this on a distributed system with a centralised Controller**
 ----
@@ Line 41: / Line 52: @@
 <color #ed1c24>This guide assumes you know how to create a standard ABR output service.</color>
+----
+==== Configuration ====
 ----
-\\
-\\
     Create an ABR service as normal, but don't assign any servers to the configuration.
 \\