Differences

This shows you the differences between two versions of the page.

--- rx9004_rear_panel [2017/02/13 07:38] – walkeradmin
+++ rx9004_rear_panel [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 9: / Line 9: @@
 \\
 \\
-{{:rx9004_rear_panel.jpg?600|}}
+{{ :rx9004_rear_panel.jpg?700 |}}
 \\
-<file>
+  * S1 is generally what we use for ASI Inputs.
-S1 is generally what we use for ASI Inputs.
-LAN1/LAN2 are for control (but can be used for data)
+  * LAN1 is used for control (but can be used for data)
-LAN3/LAN4 are generally for data input.
+  * LAN2 is generally used for data input (unless you are using ASI Input).
-BNC1/BNC2/BNC3/BNC4 are for the SDI UHD Inputs and will work with quarter HD (QUAD) or 2SI feeds.
+  * I have not seen LAN3/LAN4 on any Ericsson units yet.
+  * BNC1/BNC2/BNC3/BNC4 are for the SDI UHD Inputs and will work with quarter HD (QUAD) or 2SI feeds.
+\\
+\\
+There are five spigots on the SDI card, the correct order is as follows:
+\\
+\\
+{{:rx9004_sdi.jpg?300|}}
-</file>