Differences

This shows you the differences between two versions of the page.

--- mx8400_ip_configuration [2017/01/25 11:15] – walkeradmin
+++ mx8400_ip_configuration [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== MX8400 IP Configuration ======
+<color #db5f0b>Jan 2017</color>
+\\
+\\
+----
 The MX8400 IP Address can only be set from the Serial Port (if you don't know the current IP Address). During the life of the MX8400 the serial port speed has changed from 19200 to 115200 (8,N,!), Ensure you set the correct speed in the terminal software (recommend Putty).
@@ Line 11: / Line 14: @@
     Login
-    Password:Purple
+    Password:purple
 \\
 \\
@@ Line 82: / Line 85: @@
 </file>
+\\
+Firstly set the floating address (or virtual address as it is now called) This is the address that nCompass wil use.
+\\
 \\
 <file>
@@ Line 93: / Line 99: @@
 \\
 \\
+You can set the Data Port addresses in this way, but to be honest the best way is to add the Mux to nCompass and manage it from there.
+\\
+\\
-setip ctrl v -i
-JAN 25 10:47:53: Uptime=0 days 02:35:14.584 NuTicks=0x8E2118 CPU=7%, HWM=7%
-Command 'setip' : Set the IP address of a port.
-Usage:
-         setip <port> (i[p] | m[ask] | g[ateway] | [m]e[tric]) (<ip address>|<metric:1..15)
-                port = (ctrl | ca | di | do) (p | b | v)
-setip ctrl v ip 192.168.27.205
-Command 'setip' : Set the IP address of a port.
-Usage:
-         setip <port> (i[p] | m[ask] | g[ateway] | [m]e[tric]) (<ip address>|<metric:1..15)
-                port = (ctrl | ca | di | do) (p | b | v)
-setip ctrl v i 192.168.27.205