Both sides previous revisionPrevious revisionNext revision | Previous revision |
live_capture [2017/06/25 16:01] – walkeradmin | live_capture [2023/03/09 22:35] (current) – external edit 127.0.0.1 |
---|
====== Live Capture ====== | ====== Live Capture ====== |
| <color darkorange>Jun 2017</color> |
| \\ |
| \\ |
| ---- |
\\ | \\ |
<color #ed1c24>WARNING!!!!</color> If you came to this page without looking at the [[live_capture_setup|Live Capture Setup]] page, then shame on you! You will probably find that capture does not work properly because you didn't do something very important, mentioned in the [[live_capture_setup|Live Capture Setup]] page :) | <color #ed1c24>WARNING!!!!</color> If you came to this page without looking at the [[live_capture_setup|Live Capture Setup]] page, then shame on you! You will probably find that capture does not work properly because you didn't do something very important, mentioned in the [[live_capture_setup|Live Capture Setup]] page :) |
\\ | \\ |
\\ | \\ |
It seems gphoto2 <color #ff7f27>has an issue if the shutter speed is slow. So using a shutter speed of say 1/250, then I can capture and download a file. If I use a shutter speed of say 3s, then I can capture, but download simply won't happen.</color> | |
\\ | \\ |
\\ | \\ |
Now, this depends on your camera, and whether gphoto2 supports it on your model. To get the capabilities of your camera, use the following command: | <color #ed1c24>Plese read this next section, it's quite important.</color> |
| ---- |
| <color #ff7f27>It seems</color> <color #22b14c>gphoto2</color> <color #ff7f27>has an issue if the shutter speed is slow. So using a shutter speed of say 1/250, then I can capture and download a file. If I use a shutter speed of say 3s, then I can capture, but download simply won't happen.</color> |
| \\ |
| \\ |
| On the 700D, 1/6 seems to be the cut off, if you go to 1/4, then you lose the ability to capture and download in a single command. You can of course capture, execute a wait equivalent to the shutter speed (plus a bit for writing to the card) then do a download using the <color #ed1c24>--skip-existing</color> so you only download files that have not already been backed up. |
| ---- |
| |
| \\ |
| \\ |
| Now, this depends on your camera, and whether <color #22b14c>gphoto2</color> supports it on your model. To get the capabilities of your camera, use the following command: |
\\ | \\ |
gphoto2 --summary | gphoto2 --summary |