Differences

This shows you the differences between two versions of the page.

--- cisco_for_dummies_cheat_sheet [2016/10/20 16:26] – walkeradmin
+++ cisco_for_dummies_cheat_sheet [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 8: / Line 8: @@
 interface, configure a switch management interface, and configure an interface to use DHCP for your
 Cisco network.
+\\
 \\
 ===== Configuration modes for Cisco networking =====
@@ Line 14: / Line 15: @@
 \\
 \\
-User EXEC mode:
+**User EXEC mode:**
 \\
     When you connect to a Cisco device the default configuration mode is
@@ Line 21: / Line 22: @@
     mode because the IOS prompt displays a “>”.
 \\
-Privileged EXEC mode:
+**Privileged EXEC mode:**
 \\
-    In order to make changes to the device you must navigate to Privileged EXEC mode where you may be
+    In order to make changes to the device you must navigate to Privileged
-    required to input a password. Privileged EXEC mode displays with a “#” in the prompt.
+    EXEC mode where you may be required to input a password. Privileged EXEC
+    mode displays with a “#” in the prompt.
 \\
-Global Configuration mode:
+**Global Configuration mode:**
 \\
     Global Configuration mode is where you go to make global changes to the router such as the hostname.
@@ Line 32: / Line 34: @@
     “conf t” where you will be placed at the “(config)#” prompt.
 \\
-Sub Prompts:
+**Sub Prompts:**
 \\
     There are a number of different sub prompts from Global Configuration mode you can navigate to such