Differences

This shows you the differences between two versions of the page.

--- change_segment_clean_up_period [2017/06/15 07:48] – walkeradmin
+++ change_segment_clean_up_period [2023/03/09 22:35] (current) – external edit 127.0.0.1
@@ Line 8: / Line 8: @@
 \\
 \\
-Open this file and look for the line <color #ed1c24>"periodDuration":3600,</color> change period duration from <color #ed1c24>3600</color> to <color #ed1c24>360</color>.
+Open this file and look for the line <color #ed1c24>"periodDuration":3600,</color> change period duration from <color #ed1c24>3600</color> to <color #ed1c24>360</color>. This sets the DVR to 15 minutes.
+\\
+\\
+The tsPartDuration parameter is the duration of the chunk the dvr recorder will write. By default, the value is 2000 ms. Thus, every 2s, the dvr-recorder will write a chunk of 2s.
+You can change this parameter in order to decrease the NAS loading (i.e 10000ms).
+Increasing the value of this parameter will delay the live output stream. So, if you change the value from 2s to 10s. The live will be delayed of 8s.
+\\
+\\
+The periodDuration parameter is the internal period that will be used for DVR.
+<color #ed1c24>This rule must be respected: period duration <= (DVR duration /3).</color>
+\\
 \\
 <sxh [py][; options for SyntaxHighlighter]>
 {