Differences

This shows you the differences between two versions of the page.

--- change_ip_details_permanent [2017/02/28 13:34] – walkeradmin
+++ change_ip_details_permanent [2023/03/21 20:20] (current) – walkeradmin
@@ Line 23: / Line 23: @@
 This will load the system.ini into Vi.
 \\
-<sxh [xml][; options for SyntaxHighlighter]>
+<file>
 ##### system Topology ####
 ## all parameters marked with green should be changed with relevant site configuration ##
@@ Line 220: / Line 221: @@
 # Number of disks used by VSPP Storage:
 storage.disks = 4
-</sxh>
+</file>
 \\
 ==== Change IP Details ====
@@ Line 234: / Line 236: @@
 The IP Address details are split across these three sections.
 \\
+\\
+==== [MNG Section] ====
 \\
 First check the [MNG] section.
@@ Line 250: / Line 254: @@
 This is saying our management address is on the 192.168.27 subnet, the .0 means we are not specifying this octet in this section.
 \\
+\\
+==== [VIDEO Section] ====
 \\
 Now check the [VIDEO] section.
@@ Line 264: / Line 270: @@
     network = 10.10.0.0
 \\
-In this example the VIDEO network is 10.10, the last two octets are specified elsehwere.
+In this example the VIDEO network is 10.10, the last two octets are specified elsewhere.
+\\
+==== [AIO Section] ====
+\\
+Now check the [AIO] section.
+<sxh [xml][; options for SyntaxHighlighter]>
+[AIO]
+type = stateful
+default_gateway = MNG
+os = CENTOS6.6.P30.3-X86_64
+machine = SERVER
+site = FX-SITE
+node.aio1 = aio103, MNG-20, VIDEO-20.1
+repos = file:///var/sysu/repos/centos6.6, file:///var/sysu/repos/fabrix_sw
+apps = syspu, dns, manager, postgres, gui, storage, streamer, graphite, riemann, mon_agent
+nic = MNG|ETH2, VIDEO|ETH3
+pod = aio-pod
+</sxh>
+There are a few configuration items here, but the main points are as follows:
+\\
+    node.aio1 = aio103, MNG-20, VIDEO-20.1
+\\
+Here the first part relates the actual VSPP chassis we are on (node.aio1 = aio103) and the next two parts are the final octets of our IP Addresses for Management (MNG) and Video.
+\\
+    MNG-20, VIDEO-20.1
+\\
+MNG-20 sets the last octet of our Management address to 20 (so 192.168.27.20)
+\\
+VIDEO-20.1 sets the last two octets of our VIDEO address to 20.1 (so 10.10.20.1)
+\\
+\\
+==== Save and Apply settings ====
+\\
+Once you have edited (this is Vi remember) and saved the file, you will need to do the following:
+\\
+\\
+Use <color red>sysu sketch</color> to load the edited configuration.
+\\
+    sysu sketch
+\\
+You will see a lot of text as the unit is configured, keep an eye out for any failures.
+\\
+\\
+Next use <color red>sysu network.config</color> to apply the network part of the system.ini
+\\
+    sysu network.config
+\\
+You can see the available options for sysu by using <color red>sysu tab tab</color>
+\\
+\\
+Now use sysu apps.config to start the apps
+\\
+    sysu apps.config
+\\
+\\
+==== Using Monit ====
+\\
+Monit is like the command service in linux, it can start and stop (among other things) the VSPP processes.
+\\
+\\
+To check the status of VSPP use:
+\\
+    monit summary
+\\
+You will see an output similar to the following (the status might differ)
+\\
+<file>
+[root@aio103 ~]# monit summary
+monit: Cannot translate 'aio103' to FQDN name -- Temporary failure in name resolution
+The Monit daemon 5.3.2 uptime: 1h 18m
+Remote Host 'java'                  Not monitored
+Remote Host 'udp-tftpserver'        Not monitored
+Process 'syspu-ui'                  Not monitored
+Process 'go-syspu'                  Not monitored
+Process 'Streamer'                  Not monitored
+Process 'Storage'                   Not monitored
+Process 'snmpd'                     Not monitored
+Process 'service_server'            Not monitored
+Process 'riemann'                   Not monitored
+Process 'postgresql9'               Not monitored
+Process 'ntpd'                      Not monitored
+Process 'named'                     Not monitored
+Process 'mon_agent'                 Not monitored
+Process 'Manager'                   Not monitored
+Process 'httpd'                     Not monitored
+Process 'memcached'                 Not monitored
+Process 'carbon-cache'              Not monitored
+Process 'statsd'                    Not monitored
+System 'system_aio103'              Not monitored
+</file>
+When you see <color red>Not monitored</color> this also means not started. To start everything use the following:
+\\
+    monit start all
+\\
+This will kick of all the processes, to check the process status you can again use <color red>monit summary</color>
+\\
+<file>
+[root@aio103 ~]# monit summary
+The Monit daemon 5.3.2 uptime: 1h 19m
+Remote Host 'java'                  Online with all services
+Remote Host 'udp-tftpserver'        Online with all services
+Process 'syspu-ui'                  Running
+Process 'go-syspu'                  Running
+Process 'Streamer'                  Running
+Process 'Storage'                   Running
+Process 'snmpd'                     Running
+Process 'service_server'            Running
+Process 'riemann'                   Running
+Process 'postgresql9'               Running
+Process 'ntpd'                      Running
+Process 'named'                     Running
+Process 'mon_agent'                 Running
+Process 'Manager'                   Running
+Process 'httpd'                     Running
+Process 'memcached'                 Running
+Process 'carbon-cache'              Running
+Process 'statsd'                    Running
+System 'system_aio103'              Running
+[root@aio103 ~]# sysu edit
+No changes were made , nothing to do
+</file>
+\\
+\\
-<sxh [xml][; options for SyntaxHighlighter]>
-</sxh>