Differences

This shows you the differences between two versions of the page.

--- change_ip_details_permanent [2017/02/28 13:18] – created walkeradmin
+++ change_ip_details_permanent [2023/03/21 20:20] (current) – walkeradmin
@@ Line 9: / Line 9: @@
 ==== Introduction ====
 \\
-To permanently change the IP details you must first be able to connect to the VSPP (see
+To permanently change the IP details you must first be able to connect to the VSPP (see Change IP Address CMD Line). Once connected we need to edit the VSPP Configuration.
+\\
+\\
+The VSPP is configured using a powerful tool called SYSU. SYSU created a file called system.ini that contains all of our configuration parameters.
+\\
+\\
+==== Using SYSU ====
+\\
+To change the VSPP configuration run the following:
+\\
+    sysu edit
+\\
+This will load the system.ini into Vi.
+\\
+<file>
+##### system Topology ####
+## all parameters marked with green should be changed with relevant site configuration ##
+##### Region and Rack properties #####
+[aio-region]
+type = region
+inherit = MANAGER:REGION
+pods = aio-pod
+[aio-pod]
+type = pod
+inherit = MANAGER:POD
+raid.mode = 0
+segment.size = 1
+geo.ids = 1
+subnets = 0.0.0.0/0
+# Do not change volume.line.size
+volume.line.size = 96
+[pod-group-aio]
+type = pod_group
+inherit = MANAGER:POD_GROUP
+pods = aio-pod
+[AIO]
+type = stateful
+default_gateway = MNG
+os = CENTOS6.6.P30.3-X86_64
+machine = SERVER
+site = FX-SITE
+node.aio1 = aio103, MNG-20, VIDEO-20.1
+repos = file:///var/sysu/repos/centos6.6, file:///var/sysu/repos/fabrix_sw
+apps = syspu, dns, manager, postgres, gui, storage, streamer, graphite, riemann, mon_agent
+nic = MNG|ETH2, VIDEO|ETH3
+pod = aio-pod
+[FX-SITE]
+type = site
+syspu = syspu
+ntp.servers = 192.168.100.150
+domains = system.fx
+timezone = Europe/London
+# Fabrix brand and version
+Type  :quit<Enter>  to exit Vim
+# Fabrix brand and version
+brand = fabrix
+version = 3.8
+[syspu]
+type = application
+inherit = SYSPU:APP
+# Changing HTTPD port that is used by Syspu (the default is port 80)
+# port = 82
+[mon_agent]
+type = application
+inherit = MON_AGENT:APP
+# push.manager is relevant for Manager >= 3.5
+push.manager = manager
+push.riemann = riemann
+# A graphite prefix that will be use by mon_agent
+parser.ini.mon_agent.ini.107 = general@prefix_name = Ericsson.VSPP
+[graphite]
+type = application
+inherit = GRAPHITE:APP
+[riemann]
+type = application
+inherit = RIEMANN:APP
+[dns]
+type = application
+inherit = DNS:APP
+domains = system.fx
+# DNS additional nameservers (optional)
+nameservers = 192.168.100.150
+[manager]
+type = application
+inherit = MANAGER:APP
+# Cluster: list of define application sections, these applications will be cluster under this manager.
+cluster = storage, streamer
+# Gui application section
+gui.section = gui
+# PostgresDB application section
+db.section = postgres
+fxdb.domains = manager.system.fx
+fxdb.domains = manager.system.fx
+enable.api = True
+regions = aio-region
+# Manager application configuration
+parser.ini.manager.ini.100 = general@DISABLE_SSL = 1
+parser.ini.manager.ini.101 = general@SRM_SERVER_ADDR =
+parser.ini.manager.ini.102 = general@PUBLIC_LISTENING_ADDR=9090
+parser.ini.manager.ini.103 = general@USE_SYSLOG = 0
+parser.ini.manager.ini.104= general@USE_STREAMER_REPORT_FOR_LINK_STATUS = false
+[postgres]
+type = application
+inherit = POSTGRES9:APP
+# Solid DB core limitation (for more details see Appendix E):
+# RSDVR private copy - Managers should use all cores in the machine (remove this configuration parameter)
+# All other production systems - Manager Solid should be limited to four cores: 0-3
+# Lab systems - Manager Solid should be limited to one core: 0
+# database.cores = 0
+# Network layout
+# db network defines the interface for client connection (all client will be configure according)
+db.network = management
+# Solid application parameters
+# Solid dedicated disk for transaction logs (Uncomment in case you set up a dedicated disk)
+# parser.ini.solid.ini.100 = Logging@LogDir = /data/solid_logs
+[gui]
+type = application
+inherit = GUI:APP
+db.section = postgres
+# Enabling GUI dashboard by referencing to graphite section:
+graphite.section = graphite
+parser.property.configuration.properties.100 = show.all = true
+[storage]
+type = application
+inherit = STORAGE_SERVICE_LEDS_SUPPORT:APP
+# Network layout
+# Cluster is the application interconnect (disks) communication network
+cluster.network = management
+# storage application configuration
+parser.ini.storage-server.ini.100 = general@USE_SYSLOG = 0
+parser.ini.storage-server.ini.101 = general@WORKING_PATH = /opt/Fabrix.TV/vs-storage/Disk
+parser.ini.storage-server.ini.102 = general@LOG_FILENAME = /opt/Fabrix.TV/logs/storage.log
+parser.ini.storage-server.ini.103 = general@DISABLE_SSL = 1
+# These parameters are controlling the application memory allocation, for small server (VM) use “50”
+# SERVER_DATA_CACHE_SIZE is memory per disk in MB
+parser.ini.storage-server.ini.104 = general@SERVER_DATA_CACHE_SIZE = 50
+parser.ini.storage-server.ini.105 = general@CLIENT_DATA_CACHE_SIZE = 50
+# Disable LED features (Normally in VM environment)
+parser.ini.storage-server.ini.106 = general@USING_VIRTUAL_BLOCK_DEVICE = false
+parser.ini.storage-server.ini.107 = general@IGNORE_BLOCK_DEVICES = sda
+parser.ini.storage-server.ini.108 = general@DEVICE_FILE_NAME_PREFIX = sd
+parser.ini.storage-server.ini.109 = USING_PHYSICAL_DISK = true
+parser.ini.storage-server.ini.110 = LED_ENABLED = false
+[streamer]
+type = application
+inherit = STREAMER:APP
+# BW Properties
+max.cdn = 1G
+max.streaming = 1G
+max.ingest = 1G
+max.total = 1G
+abr_streaming = true
+# Network layout
+# External is for "video stream" (playout) network
+external.network = management
+# Ingest is the "video ingest" network
+ingest.network = video
+# Cluster is the application interconnect (disks) communication network
+cluster.network = management
+# Uncomment and update Streamer virtual network
+# virtual.network = management
+# streamer INI parameters
+parser.ini.streamer.ini.100 = general@STREAMER_ADDR = 2929
+parser.ini.streamer.ini.101 = general@LOG_FILENAME = /opt/Fabrix.TV/logs/streamer.log
+parser.ini.streamer.ini.102 = general@STRING_TABLES_FILE = /opt/Fabrix.TV/Configuration_Files/String_Tables.xml
+# These parameters are controlling the application memory allocation, for small server (VM) use “50”
+parser.ini.streamer.ini.103 = general@TOTAL_STREAMING_THROUGHPUT = 450
+parser.ini.streamer.ini.104 = general@CLIENT_DATA_CACHE_SIZE = 200
+parser.ini.streamer.ini.105 = general@TOTAL_STREAMING_THROUGHPUT = 450
+parser.ini.streamer.ini.106 = general@DISABLE_SSL = 1
+parser.ini.streamer.ini.107 = general@USE_SYSLOG = 0
+#### Network properties ####
+[MNG]
+type = network
+name = management
+network = 192.168.27.0
+netmask = 255.255.255.0
+next_hop = 192.168.27.254
+[VIDEO]
+type = network
+name = video
+network = 10.10.0.0
+netmask = 255.255.0.0
+next_hop = 10.10.255.254
+#### Nic Properties ####
+[ETH0]
+type = nic
+device = eth0
+bootproto = static
+[ETH1]
+type = nic
+device = eth1
+bootproto = static
+[ETH2]
+type = nic
+device = eth2
+bootproto = static
+[ETH3]
+type = nic
+device = eth3
+bootproto = static
+#### Machine Property ####
+[SERVER]
+type = machine
+#
+IBM-COMMON (for all IBM servers), HP-COMMON (for all HP servers) for other brands inherit SERVER-COMMON
+inherit = SERVER-COMMON
+# uncomment, below “kcmdline” empty attribute incase of virtual environment!
+# kcmdline =
+# Number of disks used by VSPP Storage:
+storage.disks = 4
+</file>
+\\
+==== Change IP Details ====
+\\
+There are a few sections we need to change to make IP Address changes that are permanent. The main three sections we are interested in are:
+\\
+\\
+[AIO]\\
+[MNG]\\
+[VIDEO]\\
+\\
+\\
+The IP Address details are split across these three sections.
+\\
+\\
+==== [MNG Section] ====
+\\
+First check the [MNG] section.
+<sxh [xml][; options for SyntaxHighlighter]>
+[MNG]
+type = network
+name = management
+network = 192.168.27.0
+netmask = 255.255.255.0
+next_hop = 192.168.27.254
+</sxh>
+Here we specify the network and netmask settings. The main part here is the 'network' section:
+\\
+    network = 192.168.27.0
+\\
+This is saying our management address is on the 192.168.27 subnet, the .0 means we are not specifying this octet in this section.
+\\
+\\
+==== [VIDEO Section] ====
+\\
+Now check the [VIDEO] section.
+<sxh [xml][; options for SyntaxHighlighter]>
+[VIDEO]
+type = network
+name = video
+network = 10.10.0.0
+netmask = 255.255.0.0
+next_hop = 10.10.255.254
+</sxh>
+Here we are specifying the VIDEO interface subnet, the main part is the network section again.
+\\
+    network = 10.10.0.0
+\\
+In this example the VIDEO network is 10.10, the last two octets are specified elsewhere.
+\\
+==== [AIO Section] ====
+\\
+Now check the [AIO] section.
+<sxh [xml][; options for SyntaxHighlighter]>
+[AIO]
+type = stateful
+default_gateway = MNG
+os = CENTOS6.6.P30.3-X86_64
+machine = SERVER
+site = FX-SITE
+node.aio1 = aio103, MNG-20, VIDEO-20.1
+repos = file:///var/sysu/repos/centos6.6, file:///var/sysu/repos/fabrix_sw
+apps = syspu, dns, manager, postgres, gui, storage, streamer, graphite, riemann, mon_agent
+nic = MNG|ETH2, VIDEO|ETH3
+pod = aio-pod
+</sxh>
+There are a few configuration items here, but the main points are as follows:
+\\
+    node.aio1 = aio103, MNG-20, VIDEO-20.1
+\\
+Here the first part relates the actual VSPP chassis we are on (node.aio1 = aio103) and the next two parts are the final octets of our IP Addresses for Management (MNG) and Video.
+\\
+    MNG-20, VIDEO-20.1
+\\
+MNG-20 sets the last octet of our Management address to 20 (so 192.168.27.20)
+\\
+VIDEO-20.1 sets the last two octets of our VIDEO address to 20.1 (so 10.10.20.1)
+\\
+\\
+==== Save and Apply settings ====
+\\
+Once you have edited (this is Vi remember) and saved the file, you will need to do the following:
+\\
+\\
+Use <color red>sysu sketch</color> to load the edited configuration.
+\\
+    sysu sketch
+\\
+You will see a lot of text as the unit is configured, keep an eye out for any failures.
+\\
+\\
+Next use <color red>sysu network.config</color> to apply the network part of the system.ini
+\\
+    sysu network.config
+\\
+You can see the available options for sysu by using <color red>sysu tab tab</color>
+\\
+\\
+Now use sysu apps.config to start the apps
+\\
+    sysu apps.config
+\\
+\\
+==== Using Monit ====
+\\
+Monit is like the command service in linux, it can start and stop (among other things) the VSPP processes.
+\\
+\\
+To check the status of VSPP use:
+\\
+    monit summary
+\\
+You will see an output similar to the following (the status might differ)
+\\
+<file>
+[root@aio103 ~]# monit summary
+monit: Cannot translate 'aio103' to FQDN name -- Temporary failure in name resolution
+The Monit daemon 5.3.2 uptime: 1h 18m
+Remote Host 'java'                  Not monitored
+Remote Host 'udp-tftpserver'        Not monitored
+Process 'syspu-ui'                  Not monitored
+Process 'go-syspu'                  Not monitored
+Process 'Streamer'                  Not monitored
+Process 'Storage'                   Not monitored
+Process 'snmpd'                     Not monitored
+Process 'service_server'            Not monitored
+Process 'riemann'                   Not monitored
+Process 'postgresql9'               Not monitored
+Process 'ntpd'                      Not monitored
+Process 'named'                     Not monitored
+Process 'mon_agent'                 Not monitored
+Process 'Manager'                   Not monitored
+Process 'httpd'                     Not monitored
+Process 'memcached'                 Not monitored
+Process 'carbon-cache'              Not monitored
+Process 'statsd'                    Not monitored
+System 'system_aio103'              Not monitored
+</file>
+When you see <color red>Not monitored</color> this also means not started. To start everything use the following:
+\\
+    monit start all
+\\
+This will kick of all the processes, to check the process status you can again use <color red>monit summary</color>
+\\
+<file>
+[root@aio103 ~]# monit summary
+The Monit daemon 5.3.2 uptime: 1h 19m
+Remote Host 'java'                  Online with all services
+Remote Host 'udp-tftpserver'        Online with all services
+Process 'syspu-ui'                  Running
+Process 'go-syspu'                  Running
+Process 'Streamer'                  Running
+Process 'Storage'                   Running
+Process 'snmpd'                     Running
+Process 'service_server'            Running
+Process 'riemann'                   Running
+Process 'postgresql9'               Running
+Process 'ntpd'                      Running
+Process 'named'                     Running
+Process 'mon_agent'                 Running
+Process 'Manager'                   Running
+Process 'httpd'                     Running
+Process 'memcached'                 Running
+Process 'carbon-cache'              Running
+Process 'statsd'                    Running
+System 'system_aio103'              Running
+[root@aio103 ~]# sysu edit
+No changes were made , nothing to do
+</file>
+\\
+\\