a_massive_gotchya
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| a_massive_gotchya [2017/03/11 16:53] – [Regarding the 40x2 LCD] walkeradmin | a_massive_gotchya [2023/03/09 22:35] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 12: | Line 12: | ||
| \\ | \\ | ||
| Below is a picture of the connector, and you can see where pin 1 is written on the PCB. When I tested the LCD (before I had any PCBs made) I used jumper cables, and put the correct pin (using Pin 1 on the LCD PCB as a reference) and all worked fine. (When I say I used Pin 1 on the LCD PCB I mean the white number 1 on the board. | Below is a picture of the connector, and you can see where pin 1 is written on the PCB. When I tested the LCD (before I had any PCBs made) I used jumper cables, and put the correct pin (using Pin 1 on the LCD PCB as a reference) and all worked fine. (When I say I used Pin 1 on the LCD PCB I mean the white number 1 on the board. | ||
| + | \\ | ||
| + | \\ | ||
| + | So please <color red> | ||
| + | \\ | ||
| \\ | \\ | ||
| \\ | \\ | ||
a_massive_gotchya.1489251207.txt.gz · Last modified: 2023/03/09 22:35 (external edit)