WalkerWiki - wiki.alanwalker.uk

User Tools

Site Tools

Trace:
test_decoder_card

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
test_decoder_card [2018/10/03 10:47] – walkeradmintest_decoder_card [2019/03/11 08:46] – walkeradmin
Line 1: Line 1:
 ====== Test Decoder Card ====== ====== Test Decoder Card ======
-<color darkorange>Oct 2018</color>+<color darkorange>Oct 2018</color>\\  
 +<color darkorange>Updated Feb 2019</color>
  
 ---- ----
Line 12: Line 13:
 \\  \\ 
 \\  \\ 
 +----
 +**Introduction**
 +\\ 
 +\\ 
 +The hardware list for devices is:
 +\\ 
 +\\ 
 +**decoder0 (decoder card)**\\ 
 +**delta-x3600 (ASI card)**\\ 
 +**sdi**\\ 
 +\\ 
 +\\ 
 +lspci gives (this unit has no RF card)
 +\\ 
 +<file>
 +00:00.0 Host bridge: Intel Corporation Device 5918 (rev 05)
 +00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
 +00:01.1 PCI bridge: Intel Corporation Skylake PCIe Controller (x8) (rev 05)
 +00:02.0 VGA compatible controller: Intel Corporation Device 591d (rev 04)
 +00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
 +00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
 +00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
 +00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
 +00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)
 +00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
 +00:1d.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #11 (rev f1)
 +00:1d.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #12 (rev f1)
 +00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31)
 +00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
 +00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
 +00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
 +00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
 +02:00.0 Multimedia video controller: TELEFON AKTIEBOLAGET LM Ericsson Device 1234
 +03:00.0 Multimedia controller: Deltacast Device 000f
 +05:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
 +06:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
 +</file>
  
 ---- ----
Line 27: Line 65:
     decoder0     decoder0
     sdi0     sdi0
 +
 +{{:ls_dev.jpg?900|}}
 \\  \\ 
 \\  \\ 
Line 38: Line 78:
 ---- ----
 ==== When the Decoder is in use ==== ==== When the Decoder is in use ====
 +
 +<file>
 +    From the command line, run:
 +    
 +    lsmod | grep decoder
 +
 +    You should see an output similar to the following:
 +    
 +    decoder  22463  1
 +    
 +    decoder is the decoder module
 +    
 +    22463 is the driver size in bytes, so this may change depending on your verions
 +    
 +    1 is the number of decodes. So 0 means you are not decoding using the module, and 1-4 is decodes (1 UHD or up 
 +    to 4 HD)
 +
 +    
 +    
 +    For the SDI:
 +
 +    lsmod | grep sdi
 +
 +    sdi  17706  1
 +    
 +    Last number is number of instances using driver. 0 means the device isn't used.
 +</file>
 +{{:lsmod_decoder.jpg|}}
 +\\ 
 +\\ 
 +{{:lsmod_sdi.jpg?370|}}
 +
 +\\ 
 +\\ 
 +
test_decoder_card.txt · Last modified: 2023/03/09 22:35 by 127.0.0.1