Differences

This shows you the differences between two versions of the page.

--- smpte-352_link_number [2016/11/22 12:31] – walkeradmin
+++ smpte-352_link_number [2016/11/22 12:36] – walkeradmin
@@ Line 28: / Line 28: @@
     root
     (no password)
+\\
+\\
+Now enter the command <color red>RepConsole</color>
+\\
+    RepConsole, you will now see the prompt change to REP>
+\\
+\\
+To see the SMPTE-352 Link Numbers, enter the following command:
+\\
+    video status
+    The output will be similar to the following:
+    SDI input 0 locked to 1080p at 59.94 frames/s (SMPTE-352 link number 0)
+    SDI input 1 locked to 1080p at 59.94 frames/s (SMPTE-352 link number 1)
+    SDI input 2 locked to 1080p at 59.94 frames/s (SMPTE-352 link number 2)
+    SDI input 3 locked to 1080p at 59.94 frames/s (SMPTE-352 link number 3)
+    UHD input remapping: none
+    Video set to 2160p (interleaved format) at 59.94 frames/s
+    Video source is SDI (video locked)
+    Action on video loss is freeze frame without ident text
+    Front panel video monitor source is output 0 to NARA
+\\
+We can see in the above example that the SMPTE-352 link numbers are 0-0, 1-1, 2-2 and 3-3, so they are in the correct order. For this reason the line <color red>UHD input remapping</color> is set to <color red>none</color>, as no remapping is required.
 \\
 \\