Differences

This shows you the differences between two versions of the page.

--- printed_circuit_photos [2017/03/27 13:36] – walkeradmin
+++ printed_circuit_photos [2017/04/06 22:18] – [PCB Top with IC Sockets and Resistors] walkeradmin
@@ Line 2: / Line 2: @@
 <color #db5f0b>Mar 2017</color>
 \\
+\\
+{{:pcb_title_image.jpg?500|}}
 \\
@@ Line 7: / Line 9: @@
 Please bear in mind the current PCB revision is <color #ed1c24>v3.1</color>. This is due to errors found in the early builds (mostly to do with hole sizes). Once the <color #ed1c24>v3.1</color> boards have arrived and been tested, I will upload those photos here.
+\\
+\\
+So here it is, PCB v1.0 that I have built up. It worked first time with no modification, so I was pretty pleased. The main issue with this PCB was that I used hole sizes that were a little too small on the 40way header, so it was a tight squeeze. I also didn't via all the holes (only the ones connected in the schematic) and for better soldering, I should have done them all.
+\\
+\\
+Both of these issues are now fixed on the v3.1. Why the jump from v1.0 to 3.1? Well there are a few subtle changes, some tracks have been re-routed for tidiness, some resistors moved a little and the outline has been changed to have round corners (no idea if the PCB manufacturer will cut them like this though).
+\\
+\\
+Keep an eye on this page for the v3.1 photos, hopefully by the end of April 2017, depending on shipping (can be 4-6 weeks to come from Hong Kong to the UK).
 \\
 \\
@@ Line 17: / Line 28: @@
 ----
-==== PBC Bottom with 40W Header ====
+==== PCB Bottom with 40W Header ====
 \\
-{{:002.jpg?500|}}
+{{:ntp_pcb_003.jpg?500|}}
 \\
@@ Line 25: / Line 36: @@
 ==== PCB Top with IC Sockets and Resistors ====
 \\
-{{:001.jpg?500|}}
+{{:ntp_pcb_004.jpg?500|}}
 \\
@@ Line 43: / Line 54: @@
 ==== PCB Isometric View with 7 Segment LED attached to Raspberry Pi Zero ====
 \\
-{{:005.jpg?500|}}
+{{:005b.jpg?500|}}
 \\