Differences

This shows you the differences between two versions of the page.

--- move_ec2_instance [2017/07/26 18:14] – [Move EC2 Instance] walkeradmin
+++ move_ec2_instance [2017/07/26 18:30] – [Move EC2 Instance] walkeradmin
@@ Line 41: / Line 41: @@
 \\
 From the pop out list select <color #ff7f27>Image</color> then <color #ff7f27>Create image</color>.
+\\
+\\
+The Create Image page will open.
+\\
+\\
+{{ :aws_move_instance_003.jpg?900 |}}
+\\
+Enter the following information:
+\\
+\\
+**Image name:**           A simple name to identify the image.
+**Image description:**    A description for the image.
+**No Reboot:**            If you tick this, the Image may have issues, best to allow reboot if possible.
+\\
+\\
+**Size GiB:**             Size of storage for image (I went with the default)
+**Volume Type:**          Magnetic, don't need SSD for simple storage.
+\\
+\\
+Select <color #ff7f27>Create Image</color>.
+\\
+----
+<color #ed1c24>WARNING!:</color> Now I know I go on about this, but the space you use, might not be free. Remember you get 30GB free. If you exceed that you start to pay per hour. Even if you do exceed it, you will finish this process in about 20-30 minutes, and can delete this AMI, so your costs again should be no more than a few pence, if anything at all.
+----
+When you select the <color #ff7f27>Create Image</color> button, you will see a confirmation window.
+\\
+\\
+{{ :aws_move_instance_004.jpg?600 |}}
+\\
+Just accept the message by selecting <color #ff7f27>Close</color>.
+\\
+\\
+\\
+\\