2016
This is not a default Linux app so will likely have to be installed. nload allows the real time monitoring of network traffic and bandwidth. If you have multiple interfaces, you can scroll through them with nload to see the load of each interface.
First, turn on EPEL repo on a CentOS or RHEL based system. Type the following yum command to install nload:
yum install nload
Type the following apt-get command:
sudo apt-get install nload
From a command line, simply enter:
nload
Below is an example output to the screen of nload, this is from a Raspberry pi that was doing a dd backup across the network.
use the left right cursor keys ← → to change the monitored interface
Device eth0 [192.168.1.7] (1/3): =============================================================================================================== Incoming: ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ ################################ Curr: 27.37 MBit/s ################################ Avg: 27.40 MBit/s ################################ Min: 27.01 MBit/s ################################ Max: 27.84 MBit/s ################################ Ttl: 388.13 MByte Outgoing: Curr: 736.24 kBit/s Avg: 640.35 kBit/s Min: 502.74 kBit/s ............||.|... ..||||| Max: 764.88 kBit/s ################################ Ttl: 292.67 MByte